Zaptec Pro charging station 4G

• Type 2 charging socket with self-closing cover
• Charging power up to 22kW at 32A/3-phase
• Integrated miniature circuit breaker 3 x 40A type C
• Integrated residual current circuit breaker (RCD) type B
• Integrated load management with phase balancing
• Connectivity via WLAN, PLC and 4G
• RFID / NFC reader and Bluetooth for identification
• Integrated electricity meter MID-tested and calibrated
• ISO 15118 "Plug and Charge ready"
• Protection class IP54, for indoor and outdoor use and
• IK 10 impact resistance
• Dimensions: H: 392mm, W: 258mm, D: 112mm
• 5-year product guarantee

The sophisticated charging station for larger installations

Back plate not included

• Maximum operational safety and selectivity in the event of a short circuit thanks to the integrated circuit breaker, in addition to the integrated type B residual current circuit breaker.
• MID-calibrated meter: future-proof for all billing requirements (HT/NT differentiation possible, ZEV billing for solar power & e-mobility with 15-minute load profiles possible, etc.) - investment security even in the event of any future METAS requirements.
• PLC as an additional communication option to WiFi and 4G eSIM for robust and cost-effective connectivity even in large installations.
• ISO 15118 standard: ready for future new user-friendly options such as Plug&Charge, bidirectional charging via AC etc. - investment security.
• High-quality and robust construction with operational margin (e.g. operating range up to +50°C) - 5-year product warranty and an expected service life of more than 10 years.

All in all, the Zaptec Pro solution offers maximum operational, investment and future security

aptec Pro is a wall or column charging station with alternating current according to IEC 61851-1, EVSE mode 3. 16px

Dimensions and weight

• H: 392 mm, W: 258 mm D: 112 m
• Weight: approx. 5 kg (including back plate)

Installation / circuit

• Fuse protection of the circuit(s) with maximum 63A

Back plate Connection box

• Cable cross-section 2.5-10 mm²
• Cable diameter 10-20 mm

Installation network, voltages

• TN, IT and TT
• 230VAC ±10%
• 400VAC ±10%

Max. Current and charging power

• 22kW at 32A / 3-phase (only for TN networks)*
• 12.7kW at 32A / 3-phase (IT networks)*
• 7.4 kW at 32A / 1-phase (IT/TN network)*
• 3W in standby

Circuit breaker

• 3 x 40 A type C
• LS switch, Lovato P1 MB 3P C40, 10KA

Temperature range

• -30°C to +40°C

Charging socket

• IEC 62196-2 type 2 with integrated self-closing cover. The electronic lock can be permanently locked by the user.

Earth fault protection

• Built-in type B RCD A calibration and self-test are carried out before the start of each charging cycle. RCD can be automatically reset by disconnecting from the charging plug.

Integrated energy meter

• MID class B tested and calibrated (EN.50470)

Theft protection

• The front cover of the Zaptec Pro can only be opened with a special tool. The charging cable can be permanently locked to the charging station.

Load balancing

• Together with other Zaptec Pro charging stations, the available power in the installation is automatically distributed between the devices and phases.

Phase balancing

• The charging station dynamically selects any single-phase or three-phase phase in a system with other Zaptec Pro charging stations, depending on the available power.

Communication interface and cloud connection / network

• 4G LTE-M
• WLAN 2.4 GHz, IEEE 802.11 b/g/n (channels 1-11)
• Powerline (PLC) - HomePlug Green PHY®, 10 Mbit/s

Identification and configuration

• Bluetooth Low Energy (BLE 4.1)
• RFID/NFC reader - Mifare Classic, type A 15px
• Support of ISO15118 (built-in PLC for future communication with the vehicle) e.g. Plug and Charge.
• RGBW LED circuit for device status

Standards and approvals

• CE according to the Radio Equipment Directive 2014/53/EU. The ROHS Directive 2011/65/EU. Compliance with IEC 61851-1 (TÜV SÜD) and IEC 61851-21-2

Degree of protection

• IP54, for indoor and outdoor use
• IK10 impact protection
• UL94 - 5VB flammability class
• UV-resistant

Electrical protection

• Protection class I
• Overvoltage category III (4 kV)

Integration services

• Integration options from third-party providers
• API, webhooks
• OCPP 1.6J Cloud-to-Cloud
• Message subscription

*32A is available but may be limited by the battery condition of the vehicle and temperature increases at the charging station

Scope of delivery :

1x Zaptec Pro charging station 4G consisting of:

• Charging station

• Smartkey

• Nuts for mounting on a back plate 4pcs.

• instructions